Replacing the camera module – Dell Inspiron M5040 (Mid 2011) User Manual
Page 66
66
Camera Module
Replacing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Use the alignment posts on the display cover to snap the camera module
into position.
4 Replace the display bezel. See "Replacing the Display Bezel" on page 60.
5 Replace the display assembly. See "Replacing the Display Assembly" on
6 Replace the hinge cover. See "Replacing the Hinge Cover" on page 53.
7 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest
8 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
1
display cover
2 tabs (2)
3
camera module
4 camera cable
2
3
4
1