Dell OptiPlex 7010 (Mid 2012) - Manual (Page 27)

Installing The Processor
1. Insert the processor into the processor socket. Ensure the processor is properly seated. The golden triangle mark
on the processor should align with the triangle mark on the system board.
2. Gently lower the processor cover.
3. Press the release lever down and then move it inward to secure it with the retention hook.
4. Install the heat sink.
5. Install the cover.
6. Follow the procedures in After Working Inside Your Computer .
Removing The System Fan
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the
a. cover
b. front bezel
c. optical drive
d. hard drive
3. Press the plastic clip to release the system-fan cable from the system board.
27