Dell Wireless Printer Adapter 3300 - Manual (Page 7)

Basic Setup
Minimum requirements
Selecting a location for your wireless printer adapter
Setup overview
Determining your wireless network settings
Setting up your wireless printer adapter
Installing your printer on the network
Minimum requirements
The Dell Wireless Printer Adapter 3300
An existing wireless network. The following security types are supported:
No security
WEP with 64 bit or 128 bit security keys
WPA (WiFi protected access) - personal in pre-shared key mode over TKIP (Infrastructure mode
networks only)
A computer that is connected to your wireless network
A network-capable printer
The Dell Wireless Printer Adapter 3300 Setup CD
The software CD that came with your printer
NOTE: To use the Dell Wireless Printer Adapter 3300 Setup Wizard on the Setup CD, your computer
must be running Windows 2000 or Windows XP.
Selecting a location for your wireless printer adapter
The location of your wireless printer adapter is vital to ensuring that it works effectively. Follow these
guidelines when determining a location for your wireless printer adapter:
Place the wireless printer adapter on a flat, level surface away from excessive heat, cold, and moisture.
Keep the wireless printer adapter within appropriate range of a wireless access point if your network
uses an Infrastructure configuration.
Keep the wireless printer adapter away from other non-essential electronic devices such as microwave
ovens or other appliances.