Dell Compellent Series 40 - Manual (Page 160)

152 Storage Center 5.5 System Manager User Guide
Controllers
• Target Count: Number of active disk drives in this system
• Both Count: Total of front-end devices and back-end disk drives
• Map Count: Number of volumes mapped to this system
Viewing FC Virtual Port Mode General Information
General information for an FC card with Virtual Ports enabled is divided between the FC IO
card and Virtual Ports on the IO card.
Note The information displayed is the same as that of a FC IO card without Virtual Ports
(shown in
Figure 119 on page 151 ), except that Usage and Preferred Controller are
not displayed.

To view general information for an FC port – physical ports
If Virtual Ports are enabled, the System Manager displays information for both the physical
FC IO card and the Virtual Port that resides on the card.
1 To view information for the physical port, select an FC Card. The FC IO card General
Information window appears.
Figure 120. FC IO Card General Information – Physical Port
The window displays:
• Name
• World Wide Name: Unique name for this item
• Type: Slot type