Dell Compellent Series 30 - Manual (Page 219)

211
Configuring iSCSI IO Cards
Configuring iSCSI IO Cards
All iSCSI IO Cards must be assigned static IP Address, Subnet Mask, and Gateway values
before the IO Cards can be used. The Configure iSCSI IO Cards wizard simplifies iSCSI IO
card configuration by allowing you to configure cards through a single wizard screen. If
iSCSI cards were not configured as part of initial setup, use the Configure IO Cards wizard
to configure both initialized and initialized cards.

To configure an iSCSI IO card
1 From the Storage Management menu, choose System > Setup > Configure iSCSI IO
Cards. The Configure iSCSI IO Cards window appears.
Figure 174. Configure iSCSI IO Cards
Note Uninitialized cards display an IP Address of 0.0.0.0.
2 Enter IP Address, Subnet Mask, and Gateway values for all IO Cards.
3 Click Save Configuration to configure the iSCSI IO Card. A progress window appears
showing configuring and port refresh progress.
If any IO Cards have not been configured, a warning message is displayed. Select Yes
to leave the IO cards uninitialized.
4 When configuration is complete, the wizard closes automatically.