Dell XPS 12 (9Q23, Late 2012) - Manual (Page 43)

Removing the Display Assembly
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For additional safety best
practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 10.
2 Remove the battery. See "Removing the Battery" on page 13.
Procedure
1 Disconnect the power-adapter port cable from the system board.
2 Using the pull tabs disconnect the display cables from the system board.
3 Disconnect the antenna cables from the connectors on the wireless mini-card.
1
2
3
Removing the Display Assembly | 43