Chicago Electric Heavy Duty Hot Knife 66182 - Manual (Page 7)

SKU 66182 For technical questions, please call 1-800-444-3353. Page 7
SYmBOlOgY
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
n0 xxxx/min.
No Load Revolutions per Minute
(RPM)
SpEcIFIcATIONS
Electrical
Requirements
120 V~ / 60 Hz / 130 Watts
Power Switch: Push Button ON/OFF
Power Cord: 18 AWG x 3C
Power Plug: 3-Prong, Grounded
Internal Temperature Control: Rheostat
Power Indicator Light: Red L.E.D.
Product
Applications
Sharp edge of Blade for line cutting.
Side of Blade for wide groove cutting.
Cutting Depth
Adjustments
(3-3/4” with Scale Bracket)
(5-7/16” without Scale Bracket)
Temperature
Ranges
1-Level = 0° Fahrenheit
2-Level = 248° Fahrenheit
3-Level = 527° Fahrenheit
4-Level = 725° Fahrenheit
5-Level = 840° Fahrenheit
.Additional
Features
Push Button, momentary, ON/OFF
Power Switch (Automatically returns to
OFF position when released).
UNpAcKINg
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
prODUcT FEATUrES
FIgUrE A
pOWEr SWITcH
(19)
TEmpErATUrE
ADJUSTINg KNOB
(9)
pOWEr ON
lIgHT
(22)
BlADE
(2)
ScAlE
BrAcKET
(1)
clAmpINg
ScrEW
(3)
OpErATINg INSTrUcTIONS
read the ENTIrE ImpOrTANT
SAFETY INFOrmATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO prEVENT
SErIOUS INJUrY
FrOm AccIDENTAl
OpErATION:
Turn the power Switch (19) of
the tool to its “OFF” position
and unplug the tool from its
electrical Outlet before
performing any inspection,
maintenance, or cleaning
procedures.
To Adjust The cutting Depth:
The cutting depth of the Hot Knife 1.
may be adjusted up to 3-3/4” when
using the Scale Bracket. To adjust
the depth, loosen the two Clamping
Screws (3). Pull out or retract the
Scale Bracket to the desired cut-