Scanning methods, Scanning with captureperfect 3.0 – Canon IMAGE FORMULA DR-3010C User Manual

Page 22

Advertising
background image

Chapter 2 Basic Operation

- 17 -

NOTE

When scanning folded documents, switch the feed selection lever
to

(Bypass).

When placing folded documents, place the document into the scanner so that
the fold is on the right side. The side of the folded document facing you will
become the right side of the combined image.

When scanning folded documents, click the [Basic] tab in the Properties for
Canon DR-3010C dialog box

→ select [Folio] from the Scanning Side drop-

down list

→ click [OK].

(See Chapter 4, "ISIS/TWAIN Driver Settings - Scanning Side Settings," in the
User Manual.)

The maximum size for the combined image is 11" x 17"/A3. When using the
Folio function for an irregular document size, click the [Basic] tab in the
Properties for Canon DR-3010C dialog box

→ select [Auto-detection] from the

Page Size drop-down list

→ click [OK].

Ultrasonic Double Feed Detection cannot be used when scanning folded
documents.

When scanning with the DR-3010C, in addition to scanning from an application,
you can also use the Job function to perform scanning by pressing the Start key.
This section describes the procedures for scanning using the CapturePerfect 3.0
software included with the scanner, scanning using the Job function, and other
special scanning.

T

CapturePerfect 3.0 is an ISIS-compatible application developed for Canon

document scanners. CapturePerfect 3.0 includes the following modes. Select the
desired scan mode from the Scan menu to perform scanning.

Scan Batch to File
Documents are scanned with the preset scanning conditions, and the scanned
image data is saved to a specified folder.

Scan Batch to Print
Documents are scanned with the preset scanning conditions, and the scanned
image data is printed on a specified printer.

Scan Batch to Mail
Documents are scanned with the preset scanning conditions, the e-mail
software application is started, and the scanned image data is attached to a new
e-mail message.

Scanning with CapturePerfect 3.0

4. Scanning Methods

Scan Batch to Print
Prints the scanned image on a specified printer

Scan Batch to File
Saves the scanned image to a specified folder

(Network)

Scan Batch to Mail
Starts e-mail software and attaches the scanned
image to a new e-mail

DR-3010C

Advertising