Casio EX-ZR10 EN - Manual (Page 53)

53
Snapshot Tutorial
• When shooting CS images, the snapshot image quality automatically changes to
“Normal”.
• If there is not enough available capacity on the memory card, you may not be able
to record the number of CS images indicated on the monitor screen. Make sure
your memory card has sufficient remaining capacity before shooting with using
continuous shutter.
• With High Speed CS and F CS, exposure and focus for the first image are applied
for successive images as well.
• When using a continuous shutter mode, keep the camera still until shooting is
finished.
• With High Speed CS and F CS, the flash setting automatically becomes ? (Flash
Off).
• Zoom is disabled during continuous shutter operations.
• The following image sizes cannot be selected while shooting with High Speed CS:
“12M”, “3:2”, “16:9”. Entering the High Speed CS mode while any one of these
image sizes is selected will cause the image size setting to change to “10M”
automatically.
• The following image sizes cannot be selected while shooting with the F CS mode:
“3:2”, “16:9”. Entering the F CS mode while one of the above is selected will cause
the image size setting to change to “12M” automatically.
• With High Speed CS and F CS, the maximum number of images that can be
recorded during each session is limited, regardless of how much memory card
storage capacity is available.
The number of images will be restricted even further or shooting may be impossible
when remaining memory card capacity is less than the allowable number of images
for a particular CS mode.
• The Triple Self-time cannot be used in the High Speed CS mode.
• The Self-timer cannot be used in the Prerecord CS mode.
• Continuous Shutter (CS) shooting is not supported while Premium Auto is being
used.
• Single SR Zoom and Multi SR Zoom cannot be used in combination with High
Speed CS.
Continuous Shutter Precautions
High Speed CS
F CS Specified maximum number of continuous shutter shots
(Max CS shots)
B