Creative Labs Creative E-MU 202 - Manual (Page 15)

E-MU USB Audio Control Panel
0202 USB 2.0 Owner’s Manual 15
E-MU USB AUDIO CONTROL PANEL
After you have successfully installed the audio drivers, launch the E-MU USB
Audio control panel. The E-MU USB Audio control panel is shown below.
• Windows: The E-MU USB Audio control icon will be visible in the Taskbar,
which is normally located in the bottom right of the screen. It can
also be launched from the Start Menu
(All Programs, Creative Professional, E-MU USB Audio Application).
• OS X The E-MU USB Audio control application is located in the Appli-
cations folder . You can also open the E-Control Application
using the icon on the desktop.
1. Skin
Choose between different appearances for the E-MU USB Audio control
panel.
2. View
Hide the application (Ctrl+H, Windows) You can restore the application by
clicking the E-MU icon
in the System Tray (Windows), or by clicking the
E-MU icon in the Dock (OS X).
3. Help
About E-MU 0202 USB 2.0, Audio control, Launch Manual, Check Updates
4. Device
If you are using more than one E-MU USB Audio device, you can choose
which unit is currently being controlled.
NOTE
There are some limitations
when operating at 176.4/
192k sample rates.
PC - No Direct Monitor
Mac - Disabled
5. Sample Rate
Allows you to set the system sample rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz,
176.4kHz or 192kHz.
1
2 3
4
5