Cabletron Systems 6H122-16 - Manual (Page 56)

Chapter 5: Local Management
5-16 6H122-16 User’s Guide
5.7 CHASSIS CONFIGURATION SCREEN
The Chassis Configuration screen, Figure 5-9 , allows the user to set the
chassis date and time, IP address and Subnet Mask, the operational mode
of all modules installed in the chassis, and to view the chassis uptime.
To access the Chassis Configuration screen from the Chassis Menu
screen, use the arrow keys to highlight the CHASSIS
CONFIGURATION menu item and press ENTER. The Chassis
Configuration screen,
Figure 5-9 , displays.
Figure 5-9 Chassis Configuration Screen
The following briefly explains each Chassis Configuration screen field:
MAC Address (Read-Only)
Displays the base physical address of the chassis.
IP Address (Modifiable)
This field allows the IP address to be set for the 6C105 chassis. If an IP
address is assigned to the 6C105 chassis all the interface modules
installed in the chassis can be managed via this IP address, eliminating the
need to assign an IP address to each interface module. To set the IP
address, refer to
Section 5.7.1 .
Chassis Configuration
2361_41
MAC Address:
IP Address:
Subnet Mask:
Chassis Date:
Chassis Time:
Screen Refresh Time:
Screen Lockout Time:
Chassis Uptime XX D XX H XX M
Operational Mode: [802.1D SWITCHING]
00-00-ID-00-00-00
0.0.0.0
0.0.0.0
6C105 LOCAL MANAGEMENT
Event Message Line
RETURN SAVE
01/11/1998
14:23:00
30 sec.
15 min.
EXIT