3 speed turntable, Connecting optional equipment, About this manual – Crosley Radio CR40 User Manual

Page 5: Welcome table of contents, Troubleshooting line out, Subwoofer output jack

Advertising
background image

8

3

Getting Started

Unpacking................................. 4
Power Source........................... 4
Control Locators....................... 5,6

Basic Operation

Turntable Operation.................. 7
Accessory: Adapter for 45 rpm
.................................................. 7

Connecting Optional Equipment

Line Out .................................. 8
Subwoofer Output Jack .......... 8

General

Troubleshooting Guide............ 8
Warranty................................... 9

About This Manual

Thank you for purchasing the Crosley Compact 3

Speed Turntable (CR40). Before operating this unit,

please read this manual thoroughly and retain it for

future reference.

Instructions in this manual describe the control

functions of the CR40.

Welcome

Table of Contents

There is no Power

1

The AC adaptor is not connected to either a

power outlet or unit.

2

The unit is not turned ON : Rotate the ON-OFF

SWITCH from the OFF position.

Turntable will not work

1

The white protective needle cover was not

removed.

2

Adjust the Volume Control knob.

Troubleshooting

Line Out

To use your turntable as an audio output device that

can be hooked up to an existing stereo system,

follow the steps below.

1

Plug Auxiliary cable into the LINE OUT JACK(5)

on the back of your unit.

2

Plug the other end of the Auxililary cable into

the input jack on your desired external

component.

3

Check the volume level of your external

component.

4

See operators manual for correct operation of

the external component.

Connecting Optional Equipment

The subwoofer output jack enables you to attach a

subwoofer (not supplied) which will enhance bass

response. Please contact your retailer for suitable

subwoofer models.

Subwoofer Output Jack

3 SPEED TURNTABLE

Advertising