Clarion XDZ616w - Manual (Page 11)

XDZ616
15
English
CD Operations
Scan play
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is canceled.
∗
The scan play is useful when you want to select a
desired track.
1. Press SCN button 4 to start track scanning.
“SCN” lights in the display.
2. To cancel the scan play, press SCN button 4
again. “SCN” goes off from the display and
the current track continues to play.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press RPT button 5 . “RPT” lights in the dis-
play and the current track is repeated.
2. To cancel the repeat play, press RPT button
5 again. “RPT” goes off from the display and
normal play resumes.
Random play
The random play selects and plays individual tracks
on a disc in no particular order. This function con-
tinues automatically until it is canceled.
1. Press RDM button 6 . “RDM” lights in the dis-
play, an individual track is selected randomly
and play begins.
2. To cancel the random play, press RDM but-
ton 6 again. “RDM” goes off from the display
and normal play resumes.
Other Handy Functions
Setting the clock
1. Press and hold ADJ button 2 for 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
% to select “CLOCK”.
3. Press ENT button # .
4. Press the right or left side of SEARCH button
% to select the hour or the minute.
5. Turn the Rotary knob $ clockwise or coun-
terclockwise to set the correct time.
∗
The clock is displayed in 12-hour format.
6. Press ENT button # to store the time into memory.
7. Press ADJ button 2 to return to the previous mode.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for radio stations and CDs.
The numbers of titles that can be entered for each
mode are as follows.
1. Press FNC button 3 to select the mode you want
to enter a title. (radio, CD, CD changer or TV)
∗
Titles cannot be entered for MDs with this unit.
2. Select and play a CD or a CD in the CD changer
or tune to an appropriate TV or radio station.
3. Press DISP button 0 and display the sub-
title.
4. Press TITLE button 2 . “TITL” appears in the
display and the cursor position flashes.
5. Press the right or left side of SEARCH button
% to move the cursor.
6. Press DISP button 0 to select a character.
Each time you press DISP button 0 , the char-
acter changes in the following order:
Capital letters ➜ Numbers ➜ Symbols ➜
Capital letters...
Mode Number of titles
Radio mode 30 titles
CD mode 50 titles
TV mode 15 titles
CD changer mode Number of titles
RDC655z connected 60 titles
RDC655Tz connected 100 titles
RDC1255z connected 50 titles