Configuring ip/tv broadcast servers – Cisco IP/TV 3400 Series User Manual
Page 103
5-3
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Chapter 5 Basic Configuration of IP/TV Program Manager and IP/TV Broadcast Server
Configuring IP/TV Broadcast Servers
Step 4
Enter the IP address or DNS name of the IP/TV Broadcast Server.
Note
If using DNS names, be sure that DNS resolution works from IP/TV
Program Manager, IP/TV Broadcast Server, and all IP/TV Viewer
desktops.
Step 5
Click Add Server.
Step 6
through
for each additional IP/TV Broadcast Server.
Configuring IP/TV Broadcast Servers
To configure each IP/TV Broadcast Server, follow these steps:
Step 1
Start the IP/TV Broadcast Server and view the Program Listings window.
If the IP/TV Broadcast Server is already running but the Program Listings
window is not visible, double-click the IP/TV Server icon in the system tray.
Step 2
Choose Settings > Configure IP/TV Server.
Step 3
Click the Server tab.
Step 4
In the IP/TV CM Host field, enter the IP address or DNS name of the system
running IP/TV Program Manager.
Step 5
Click OK.
Step 6
Click the Refresh Listings icon in the IP/TV Server window.
Step 7
through
for each IP/TV Broadcast Server.