Cisco IP/TV 3400 Series - Manual (Page 34)

Chapter 1 Introducing IP/TV Servers
Cisco IP/TV Broadcast Servers
1-8
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Input/Output Ports and Connectors
The Cisco IP/TV 3425 and 3425A Broadcast Servers have the following I/O
connectors:
• Ethernet connectors
• Serial connector
• Audio and video connectors
Table 1-4 describes the front and back panel ports and receptacles. (The front
panel is shown in Figure 1-1 and the back panel in Figure 1-2 .)
Table 1-4 Cisco IP/TV 3425 and 3425A Broadcast Servers—Ports and
Receptacles
Item Description
Front Panel
CONS port This serial port connects to a console. (Not
supported in IP/TV Servers.)
ETHERNET 0 port The Ethernet 0 cable connects to this port.
ETHERNET 1 port The Ethernet 1 cable connects to this port. (Not used
in IP/TV Servers.)
SCSI LVD only port The SCSI LVD cable for the Storage Array connects
to this port. (Not supported in IP/TV Servers.)
Slot 0 Bay for audio and video card.
Slot 1 Bay for hard drive 1.
Back Panel
Power receptacle AC. The power cord connects to this plug.
Power switch This switch toggles between on and off.
A power light on the front panel, when lit, indicates
that the power is on.
Onboard video port A monitor connects to this standard DB-15 video
port.
Mouse port A mouse connects to this standard mouse port.
Keyboard port A keyboard connects to this standard keyboard port.