Cisco IP/TV 3400 Series - Manual (Page 45)

1-19
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Chapter 1 Introducing IP/TV Servers
Cisco IP/TV Broadcast Servers
LED Indicators
Table 1-11 describes the Cisco IP/TV 3427 Broadcast Server front panel LEDs
and their functions.
Table 1-10 Cisco IP/TV 3427 Broadcast Server Front Panel Control Buttons
Item Description
2 Power control button Turns on IP/TV Server. To power down IP/TV Server, you might need
to press the power button for a few seconds.
3 Reset button Reboots IP/TV Server. You might need to use a pen or the end of a
straightened paper clip to press the button.
Note This is a hardware reset button and does not restore the device
to the factory default software settings.
9 CD eject button Releases a CD from the drive. The CD-ROM drive is used for
software upgrades and disaster recovery.
Table 1-11 Cisco IP/TV 3427 Broadcast Server Front Panel LEDs
LED Color State Description
1 Power on Green On Indicates that power is flowing to IP/TV
Server.
Flashing Indicates that IP/TV Server is in
standby mode.
4 SCSI or IDE bus
activity Green On Indicates that there is activity on the SCSI or
IDE bus.
5 System identification Blue Off This LED is not used in IP/TV Server.
6 Information Amber On Indicates that the information log contains
information about certain conditions in
IP/TV Server that might affect performance.
7 System error Amber On Indicates that a system error has occurred. An
LED on the diagnostic LED panel will also be
on to further isolate the error.
8 CD-ROM drive activity Green On Indicates that the CD-ROM drive is in use.