Cisco IP/TV 3400 Series - Manual (Page 68)

Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3425 and 3425A Server Units
3-6
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Figure 3-5 Bracket Orientation for a 23-Inch (58.42-cm) Rack
Installing the Chassis in a Rack
After you secure the brackets to the chassis, rack-mount the chassis by securing
the brackets to two posts or mounting strips in the rack. (See
Figure 3-6 .) You
need two people to install the chassis in the rack—one person to hold the chassis
and one person to secure it to the rack.
Figure 3-6 Installing the Chassis in the Rack
The inlet and exhaust ports for cooling air are located in the front and rear of the
chassis, respectively; therefore, multiple IP/TV Servers can be stacked with little
or no vertical clearance.
44747
DRIVE 1
Content Engine 590
Front
Rear
44215
Front
Rear
Note: The second bracket attaches to the other side of the chassis.