Cisco IP/TV 3400 Series - Manual (Page 84)

Chapter 3 Installing the IP/TV Server
Installing Cisco IP/TV 3427 Broadcast Server Units
3-22
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Installing the Chassis in the Rack
To install the IP/TV Server in a rack, follow these steps:
Step 1 Push outward on the slide-rail latch (labeled 1 in Figure 3-17 ). Pull the latch back
to open the slide rail. The latch will engage and stay open. Open the other end of
the slide rail. Repeat the entire process for the other slide rail.
Figure 3-17 Latching the Slide Rails
Step 2 Align the slide rail with the front mounting flange. Use the score mark on the slide
rail (labeled 1 in
Figure 3-18 ) to align the slide rail. Push outward on the slide rail
latch to close the latch and secure the slide rail. Do the same for the front of the
other slide rail. Then do the same for the rear of both slide rails.
1 Slide rail latch 2 Right slide rail
1
83129
2