Corega CG-WLAPGMN - Manual (Page 22)

WLAPGMN User Manual
20 20
Item Specification
Authentication
Once choosing WEP must select [Shared Key]; choosing
WPA will directly click [OK] to go next step.
* Default is [Open System].
Vaild Key Select one of default WEP Key groups First~Fourth.
First Key ~ Fourth Key
Please enter 10 characters for 64Bit; 26 characters for
128Bit or 32 characters for 512Bit (number 0~9, and let-
ters a~f).
* Note: If any setting has been changed, you have to click [Reboot]-
>[Restart] to save the changes.
B. Setting WPA
WPA uses TKIP (Temporal Key Integrity Protocol) to change the
temporal key every 10,000 packets (a packet is a kind of message
transmitted over a network.) This ensures much greater security than
the standard WEP security. There are two selections-[PSK] and [EAP] :
* [WPA-PSK] is suitable for home user.
1. Click[Advanced]->[Configuration]->[Security Settings]->select
[WPA] from [Authentication] tab-> click [Apply].