Cobra Electronics ESD6060 - Manual (Page 6)

3
O P E R AT I O N • S E T T I N G S
3
O P E R AT I O N • S E T T I N G S
7 6
X K / Ka L V / S Cty X K / Ka L V / S
City mode Highway
mode
Highway/City Mode
Setting your ESD-6060 to City mode
delays all X band audio alerts at lower
signal strength levels. (A single beep will
sound when the signal is first detected.)
This will reduce false alerts while you are
driving in or near urban areas where there
are many sources for conflicting X band
signals such as microwave towers and
automatic door openers.
To change settings, follow the procedure in
the table below, which indicates what you
will see and hear as you complete each step.
The factory setting is Highway mode.
To change from
Highway mode
to City mode
To change from
City mode back
to Highway
mode
Procedure
Press and
release the
CITY button.
Press and
release the
CITY button
again.
Tone
1 beep
2 beeps
Visual Display
appears in
the display
off
CITY button
Press and release
Cty
Cty
Muting an Alert
Your ESD-6060 allows you to quickly turn
off an audio alert by momentarily pressing
the MUTE button. If you press the MUTE
button a second time during the alert, the
audio alert will be turned back on.
Auto Mute Mode
Auto Mute will automatically reduce the
audio volume of all alerts after 4 seconds
for as long as the signal is detected.
The factory setting for Auto Mute is ON.
To turn
Auto Mute
off
To turn
Auto Mute
on
MUTE button
Press and release
Procedure
Press and release
the MUTE button
while no alert
is occurring.
Press and release
the MUTE button
again while no
alert is occurring.
Tone
1 beep
2 beeps
Visual Display
none
none