Country Home Products DR SCOUT FIELD and BRUSH MOWER - Manual (Page 21)

DR  SCOUT  FIELD and BRUSH MOWER Safety & Operating Instructions 18
Removing the Engine Oil
Tools & Supplies Recommended:
■
Manual
1. Remove the Oil Filler Cap and position a suitable oil receptacle beside the oil fill tube.
2. Using the handle of the mower, tip the machine to the left and drain the oil out
through the oil filler tube into the suitable receptacle.
3. Replace the oil by following the instructions on page 9.
■
Alternate Method
1. Remove the Oil Fill Cap and vacuum the oil from the engine through the oil fill tube
using a vacuum oil drainer.
2. Replace the oil by following the instructions on page 9.
Note: If the oil is not to be reused, be sure to use environmentally safe disposal
procedures in the disposing of the used oil.
WARNING! Before performing any maintenance procedure, stop the
engine and disconnect the spark plug wire.