Casio Stylus - Manual (Page 66)

66
Connecting to a Computer
Do not connect the Rugged PDA to the computer before installing ActiveSync.
The Rugged PDA and the computer can be connected in the following way.
• When connecting via the Basic Cradle or Bridge Satellite Cradle, connect the
Basic Cradle or Bridge Satellite Cradle to the USB port or RS-232C port on the
computer, and then put the Rugged PDA in the optional cradle. Leaving the
Rugged PDA connected to the computer via the Basic Cradle or Bridge
Satellite Cradle makes it easy to connect the Rugged PDA to the computer
whenever it is necessary.
When connecting the Rugged PDA to the computer, tap ➔
ActiveSync ➔ Tools ➔ Options, in that order to check the connec-
tion to the computer. For more information refer to Help for the Rug-
ged PDA.
Using the CASIO Companion CD
The Companion CD-ROM contains software.
Put the CD-ROM into the CD drive of the computer and it will start automatically
and display a menu. From the menu screen, you can install the application or look
at the various documents.
Follow the procedure below to access information on the Companion CD-ROM.
To use the Companion CD-ROM, you must agree to the END-USER
LICENSE AGREEMENT. Read the END-USER LICENSE AGREE-
MENT and agree with it before using the Companion CD-ROM.
You need to install Active Sync 3.7 to the computer before you can connect the
Rugged PDA to the computer and exchange data.
Important
N o t e
IT-10_1/40-66-E.p65 06.6.15, 6:42 PM 66