Cecilware EL-2x6 - Manual (Page 6)

Trouble Shooting
If your Cecilware Fryer does not operate, please check the following before placing a service call.
Top Fryer EL-6, EL-15, EL-25, EL-2x6, EL-2x15
Problem Cause Remedy
1. Mains power supply 1. Check mains power supply
2. Element/ control unit not
correctly located
2. Follow the steps on page 2 to
correctly locate
3. Fuse in the plug has
blown
3. Replace the fuse in the plug with
correctly rated fuse
4. Plug and lead are
damaged
4. Call service agent or qualified
technician
5. Internal wiring fault
5. Call service agent or qualified
technician
Oil not heating.
Indicator light is off
6. Thermal cut-out has
activated
6. Remove reset button cover (A) press
button (B) to reset. See Diagram
for Thermal Cut Out Reset below.
If problem persists call service agent
or qualified technician
Oil is heating &
Indicator light is on
1. Thermostat or heating
element has failed
1. Call service agent or qualified
technician
1. Faulty pilot light
1. Call service agent or qualified
technician
Indicator light is
not on but
appliance is
operating normally
2. Oil has reached the set
temperature
2. Use fryer normally
Please ensure:
* There is correct power supply.
* The machine is plugged in correctly and power is switched on.
* The thermostat dial has been turned on.
Note all Cecilware products are tested prior to packaging.
Diagram ： Thermal Cut Out Reset
5
A
B