PolarCool 36″ ZONE PolarCool™ Fan - Manual (Page 4)

Manual No. 4801-6404 Rev 8-10 PolarCool Page 4 of 15
3. PolarCool Performance
The following table shows estimates of the performance of the PolarCool Zone Evaporative Cooling System. These
values will vary depending on the particular installation and operating conditions.
PolarCool
Model
Drive
Water Consumption
Rates
(See Note 1)
Power Consumption
(Voltage)
Typical Air
Movement Rates
(cubic feet per
minute - See Note
2)
Cooling
Area
Reservoir
(in
Gallons)
36” VS Direct 12 gallons per hr. 8 amps @ 115v /60hz 11,000 3000 ft² 38
Note 1: This estimate is under 90+ degree conditions; cooler temperatures will result in less
water usage.
Note 2: The cooling area is very dependent on the relative humidity, temperature, and the space
being cooled.
3.1 Temperature Differential Readings
The temperature drop from inlet to exit is very dependent on relative humidity and temperature. The higher the
ambient temperature and the drier the air, the greater the drop. A temperature drop of 10 to 20 degrees is common.
4. Controls
The PolarCool Zone features a user friendly control panel interface with status indicator lights.