Eb4ms, Quick start guide, Hba/raid controller installation – Proavio EB4MS User Manual

Page 3: Hba/raid controller installation - cont’d, Multi-lane interface overview, Connecting your eb4-ms - cable connections

Advertising
background image

+

+

+

+

6

HBA/RAID Controller Installation

Your EB4-MS features a RAID-ready JBOD architecture. This provides the
best support for a wide range of host bus adapters & PCI RAID controllers.
Always follow your HBA/RAID controller’s installation procedure to ensure
proper operation.

WARNING:

Allow a few minutes for the internal

computer compenents to cool down before
opening your computer system.

1.

Touch the metal PCI slot covers on the back

of your computer to discharge any static electricity.

2.

Unplug ALL cables from your computer, and remove

the side access panel according to your system type.

3.

Apple G5 users must first remove the deflector cover

and place it on a clean, safe surface.

NOTE:

Remember to replace the air deflector after you

have finished installing your HBA/RAID controller card.

7

Please follow your HBA/RAID controller’s driver installation notes to ensure
operation & hassle free configuration.

HBA/RAID Controller Installation - Cont’d

1.

Remove the PCI slot cover plate from an available

PCI slot. Consult your HBA or video capture card
for recommended slot postions.

2.

Install & secure your PCI controller card into the slot

and firmly press the card into place.

3.

Close and replace the system panel.

Port access opening

PCI slot

Reinstall the screw
to secure the card
in place.

WARNING:

To minimize the chance of electrical

shock, always follow proper saftey rules when
working with electrical components.

EB4MS

8

Introduction to Multi-Lane Cable Types

Multi-Lane Interface Overview

Your EB4-MS is equipped with industry standard 4x SFF8088 (MiniSAS)
Multi-Lane interface ports. The correct cable type is detirmined by the
HBA or RAID controller you have seleceted. Please visit our website at
www.proavio.com to learn more about cable options for your HBA.

+

+

SFF8088 [Mini SAS]

+

+

SFF8470 [Screw Type]

SFF8470 [Latch Type]

+

+

9

Ensure that both connectors are properly secured & fastned. Most commom
issues are related to poor cable connection. Do not over tighten thumbscrews.

Connecting Your EB4-MS - Cable Connections

Figure 5.

Port 1 [Disks 1-4]

Quick start guide

EB4MS | Multi-Lane Storage Array for Digital Media Production

PROAVIO

TM

SFF8088 [Mini SAS]

SFF8088 [Recieving Connector View]

Release clip

Figure 4.

+

+

Advertising