Pro-Ject Audio Systems Pre Box User Manual
Page 3
© Audio Trade GmbH · Pro-Ject Pre Box · Revision 15.10.10/15.12.10
3
Remote control
1
ON/OFF
turns the unit on or back into standby.
The blue LED on the front panel shows that the unit is powered on.
0
_
VOL
and
0
+
VOL
adjust the sound volume
CH+
CH-
VOL+
VOL-
ON/OFF
0
_
CH
and
0
+
CH
select the inputs
Front panel controls
Pre Box
Power
1
Volume
2
Input
Select
Stand-By
The switch marked Power on the front turns the unit on or back into standby. The blue LED on the front panel
shows that the unit is powered on.
Input selector
Pressing the Input Select button selects the In 1 and In 2 inputs in turn. If Input 1 is selected, the LED over the
Input Select button lights up green. If Input 2 is selected, it lights up red.
If the optional input expander Pro-Ject Switch Box is connected, Input Select will also select the additional
inputs provided by the Switch Box. For further details please see the user guide of the Pro-Ject Switch Box.
Volume
Adjust the volume to the desired level using the large knob marked Volume on the front panel.