Pro-Ject Audio Systems Pre Box SE User Manual
Page 3
© Audio Trade GmbH · Pro-Ject Pre Box SE · Revision 15.10.10/15.12.10
3
Remote control
1
ON/OFF
short press turns the unit on, long press takes it back into standby.
Powered on, a short press activates and deactivates mute
0
_
VOL
and
0
+
VOL
adjust the sound volume
CH+
CH-
VOL+
VOL-
ON/OFF
0
_
CH
and
0
+
CH
select the inputs
Front panel controls
+
-
Pre Box SE
A
B
C
D
Stand-By
A on the front turns the unit on or back into standby. The display shows STANDBY when the unit is in standby.
While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next
power on.
Dimming the display
Press and hold the buttons C and D will change the display brightness - full, half and one third.
Input selector
Pressing the Input Select buttons A and B selects the inputs 1 - 4 in turns. The selected input will be shown in
the display.
The optional input expander Pro-Ject Switch Box provides three more inputs. For further details please see the
user guide of the Pro-Ject Switch Box.
Volume
Adjust the volume (95 steps) to the desired level using the buttons C and D. The volume level will be shown in
the display. -95dB indicates min., 00dB max..
Mute
While the unit is powered on,
0
ON/OFF
activates and deactivates mute
.