Pro-Ject Audio Systems Receiver Box User Manual
Page 2
© Audio Trade GmbH · Pro-Ject Receiver Box · Revision 15.10.10/15.12.10
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO receiver.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Help to protect the environment
If you are not going to use the receiver for an extended period of time, e.g. vacation, we suggest to
disconnect it from the AC mains. Please be certain that the receiver is in standby-mode prior to unplugging
the power supply from the AC mains.
Connectors
FM Ant.
75 Ohm
IN 1
IN 2
!
Make all connections whilst the receiver is disconnected from the power supply.
!
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Inputs
Line level sources such as CD player, TV-set or MP3-player can be connected to the input sockets marked IN 1
or IN 2.
Antenna input
Connects any antenna cable with a co-axial DIN-plug / US-model F-plug.
Connection to the speakers
The output terminals accept loudspeaker cables terminated with 4mm ∅ Banana plugs, spades connectors
or naked wire.
!
Only connect one loudspeaker with an impedance not less than 4 Ohm per channel.
Mains power connection
The unit is supplied with a power supply suitable for your country's mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the
power supply to the Power 20V
socket before connecting the power supply to the mains.