Pro-Ject Audio Systems Stereo Box User Manual
Page 3
© Audio Trade GmbH · Pro-Ject Pre Box · Revision 1.6.10/1.8.10
3
Remote control
1
ON/OFF
turns the unit on or back into standby.
The blue LED on the front panel shows that the unit is powered on.
0
_
VOL
and
0
+
VOL
adjust the sound volume
CH+
CH-
VOL+
VOL-
ON/OFF
0
_
CH
and
0
+
CH
select the inputs
Front panel controls
Stereo Box
Power
1
Volume
2
Input
Select
Stand-By
The switch marked Power (press and hold to switch into standby mode) on the front panel turns the unit on or
back into standby. The blue LED on the front panel shows that the unit is powered on.
Input selector
After the unit is powered on, pressing the Power button selects the In 1 and In 2 inputs in turn. If Input 1 is
selected, the LED over the Input Select button lights up green. If Input 2 is selected, it lights up red.
If the optional input expander Pro-Ject Switch Box is connected, Input Select will also select the additional
inputs provided by the Switch Box.
Volume
Adjust the volume to the desired level using the large knob marked Volume on the front panel.