Pro-Ject Audio Systems Switch Box - Manual (Page 2)

© Audio Trade GmbH · Pro-Ject Switch Box · Revision 15.8.10/1.12.10
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO input expander.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
! Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Connectors
!
Make all connections whilst the input expander is disconnected from the power supply.
!
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Outputs
Out has to be connected to the In 2 of the Pro-Ject Pre Box. Out 2 can be used to connect a Pro-Ject
headphone amplifier, like the Head Box II ore the Head Box SE II.
Inputs
Line level sources such as CD player tuner or TV can be connected to the input sockets marked In 2 - In 5.
Trigger
The socket marked Trigger Switch on the Pro-Ject Pre Box provides a trigger signal for the Switch Box. The
trigger signal permits automatic synchronization with the input selector of the Pro-Ject Pre Box.
A 30cm long trigger cable is supplied with the Pro-Ject Switch Box for connecting the socket Trigger Switch
on the Pro-Ject Pre Box and the socket Trigger on the back of the Pro-Ject Switch Box.
Do not use the trigger input and output for any other connections for which it is not designed.
Mains power connection
The unit is supplied with a power supply suitable for your country's mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the
power supply to the Power ~16V socket before connecting the power supply to the mains.