Pro-Ject Audio Systems Stream Box RS - Manual (Page 8)

8
Wired network configuration
make sure that your Stream Box RS is connected with your home network
via Ethernet cable (RJ45 connector).
In the menu that shows up after confirming Network Setup please
go to Wired and confirm. If the Stream Box RS was in wireless network
mode before, the unit informs you now, that it has to reset for a change to
cable connection mode and asks, if you want it to do that. Please confirm
with
OK . The Stream Box RS now performs a reset.
Please go to Automatic (DHCP) now and confirm.
In the menu that now shows up, please select and confirm Proxy OFF.
Please confirm the final question “Apply Settings?” with OK . now all
settings are made. Your Stream Box RS now will work without problems
in almost all home networks and will find all available media servers.
The units shows that with the symbol in the upper right corner of the
display.
In case different settings are necessary in your network, e.g for a proxy
server or a fixed IP address, please ask the person that installed your
network for advice. Which settings are necessary in your other network
devices is not described in this manual.