Pro-Ject Audio Systems CD Box DS - Manual (Page 4)

© Audio Trade GmbH · Pro-Ject CD Box DS · Revision 2013.1.15
4
Front panel controls
CD Box DS
To switch on from standby or to standby
The push button on the left hand side turns the power on or returns the CD-player to standby mode. The blue LED
on the front panel shows that the unit is connected to the mains.
Inserting and ejecting a disc
Switch the unit on from standby. Insert the disc into the slot, with the label side facing upwards. The slot-loading
mechanism will load the disc automatically. The display shows the total number of tracks on the disc and the
total duration of the disc.
A short press of the button stops playback. Pressing again, ejects the disc.
Dimming the display
Press and hold the buttons and will change the display brightness - full, half and one third.
To access that function, playback must be stopped.
Play
starts playback of the first track. The display shows the current track number, the elapsed time of the
current track and the play icon.
Pause
pauses playback. The display shows the current track number, the elapsed time of the current track and
the pause icon.
To resume playback press again.
Stop
A short press of the button stops playback. The display shows the total number of tracks on the disc, the
total duration of the disc and the stop icon.
Stepping between tracks
Press the buttons (previous track) or (next track).
Pressing while playback, the current track starts playing from the beginning.
The display shows the number of the tracks as you step, the elapsed time of the current track and the step icon.
Scanning through the disc
Press and hold the button (fast backward) or (fast forward) to scan through the disc. The display shows
the current track number, the elapsed time of the current track and the scan icon.
Releasing or will take you back to playback.