Pro-Ject Audio Systems Stream Box DSA - Manual (Page 8)

8
Wired network configuration
make sure that your Stream Box DSA is connected with your home
network via Ethernet cable (rJ45 connector).
In the menu that shows up after confirming Network Setup please go
to Wired and confirm. If the Stream Box DSA was in wireless network
mode before, the unit informs you now, that it has to reset for a change to
cable connection mode and asks, if you want it to do that. Please confirm
with
OK . The Stream Box DSA now performs a reset.
Please go to Automatic (DHCP) now and confirm.
In the menu that now shows up, please select and confirm Proxy OFF.
Please confirm the final question “Apply Settings?” with OK . now
all settings are made. Your Stream Box DSA now will work without
problems in almost all home networks and will find all available media
servers. The units shows that with the symbol in the upper right
corner of the display.
In case different settings are necessary in your network, e.g for a proxy
server or a fixed IP address, please ask the person that installed your
network for advice. Which settings are necessary in your other network
devices is not described in this manual.