Pro-Ject Audio Systems Dock Box S Digital - Manual (Page 2)

© Audio Trade GmbH · Pro-Ject Dock Box Pro-Ject Dock Box S Digital · Revision 2013.1.15
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO docking station Dock Box.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Connectors
Pro-Ject Audio Systems, Vienna, Austria
!
Make all connections whilst the Dock Box is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white.
Never use any other power supply than the one supplied with the unit.
Connection to an integrate, pre, power amplifier or active speakers
Connect the Left/Right Out socket to a high level input on your integrated or pre amplifier, the pre input on
your power amplifier or active speakers.
!
Connected to devices with a volume control, the volume level of the Dock Box has to be set to max..
Turn the Dock Box volume level to minimum before switching on your power amplifier or active speakers.
Connection to a external D/A-converter
Connect the S/PDIF Co-axial out socket to a coaxial digital input on the D/A converter or AV processor.
Doing so allows you to use the signal in its digital for further digital processing.
Connection to a TV-set or a beamer
Connect the S-VIDEO socket to a s-video input of your TV-set or beamer.
„All digital“ units, such as iPhone 5 ® , do not support the s-video output.
Fitting and adjustment of the iPod ® /iPhone ® cradle
Use the knurled screw supplied to fix the cradle to the Dock Box chassis. Do not fully tighten the screw yet.
Now place your iPod ® /iPhone ® on the Dock Box contacts. Move the cradle so that it supports the
iPod ® /iPhone ® and tighten the screw.
This device is suitable for iPods ® /iPhones ® with 30-pole connector only.
To connect units with a lightning-connector, such as iPhone ® 5 or iPod ® Touch 5, a lightning-adapter
(lightning connector  30-pole connector) is needed.
!
Use without the cradle will eventually break the 30-pole connector of the Dock Box and the socket of
the iPod
® /iPhone ® Before connecting the iPod ® /iPhone ® any sort of cover has to be removed.
Mains power connection
Connect the low voltage plug from the power supply to the Power 9V " socket before connecting the power
supply to the mains.