Pro-Ject Audio Systems Media Box S User Manual
Page 4
© Audio Trade GmbH · Pro-Ject Media Box S · Revision 2013.1.15
4
Stepping between tracks, reverse and forward scanning
9
skips to the next track
7
restarts the current track in playback mode
Press and hold the
7
button for reverse scanning, or the button
9
to start forward scanning.
Front panel controls
Media Box S
To switch on from standby or to standby
The push button on the left hand side will toggle the player between its fully operational status and standby.
The blue LED above the stand-by push button shows that the unit is switched on. The display shows STANDBY
when the unit is in standby.
If there is no SD card inserted, or no USB-device connected, the unit will returns to standby automatically.
After switching to standby, the display shows the current software version.
Navigating the menu and playlists, main menu
and move the curser up and down, to highlight the requested option in menus and playlists.
displays the main menu and starts playback of a selected track in a playlist.
Play / Pause
Pressing starts and pauses playback. Restarts playback from the same position after stopping.
displays the playlist. starts playback of a selected track in a playlist. Starts playback of the next track.
Replacing batteries
Proceed as follows:
Unlock and slide open the battery case cover
Replace the battery.
Make sure the battery is the right way round !
Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.