Pro-Ject Audio Systems CD Box - Manual (Page 4)

© Audio Trade GmbH · Pro-Ject CD Box · Revision 15.10.10/15.12.10
4
Front panel controls
CD Box
A B C D
To switch on from standby or to standby
A short press of the button C switches the player to its fully operational status. To return to standby, press C
for more than three seconds. The display shows STANDBY when the unit is in standby.
To switch to standby, playback must be stopped.
Inserting and ejecting a disc
Switch the unit on from standby. Insert the disc into the slot, with the label side facing upwards. The slot-loading
mechanism will load the disc automatically. The display shows the total number of tracks on the disc and the
total duration of the disc.
A short press of the button C stops playback. Pressing (short) C again, ejects the disc.
Play
B starts playback of the first track. The display shows the current track number, the elapsed time of the
current track and the play icon.
Pause
B pauses playback. The display shows the current track number, the elapsed time of the current track and the
pause icon.
To resume playback press B again.
Stop
A short press of the button C stops playback. The display shows the total number of tracks on the disc, the
total duration of the disc and the stop icon.
Stepping between tracks
Press the buttons A (previous track) or D (next track). The display shows the number of the tracks as you step,
the elapsed time of the current track and the step icon.
Scanning through the disc
Press and hold the button A (fast backward) or D (fast forward) to scan through the disc. The display shows
the current track number, the elapsed time of the current track and the scan icon.
Releasing A or D will take you back to playback.