Pro-Ject Audio Systems DAC Box USB - Manual (Page 3)

© Audio Trade GmbH · Pro-Ject USB Box FL · Revision 15.10.10/15.12.10
3
Connecting to a Computer (Windows XP ® operating system)
1. Connect the USB-input of the DAC Box USB to a free USB-socket on your computer and
turn it on/make sure it is powered on.
Please note: Connection should be made to an USB-socket of your computer directly. Connecting to
USB-hubs or switches can cause problems.
2. The “new hardware found assistant“ will detect the unit and announces it as a “USB loudspeaker”.
3. open the System menu via “Start“ (Windows key)
Settings
Control Panel
Sound and Audio Devices
4. In the control panel open the
“Sound and audio“ menu.
5. In the Sounds and Audio panel select the Audio
tab. In the Replay section select your sound card
from the pull-down lists (usually preselected).
6. Select the USB Audio CODEC from the pull
down list in the Playback section. Make sure
your sound card is selected for Recording.
7. Confirm your selections by clicking the OK button and close the control panel windows.