Casio EX-V7 - Manual (Page 217)

217
USING THE CAMERA WITH A COMPUTER
The procedures you need to perform when using the camera
with your computer and when using the bundled software are
different for Windows and the Macintosh.
• Windows users should refer to “Using the Camera with a
Windows Computer” on page 217.
• Macintosh users should refer to “Using the Camera with a
Macintosh” on page 239.
IMPORTANT!
• This camera supports USB 2.0 Hi-Speed protocol. Though
it can be used with a computer that supports only USB 1.1
protocol, higher speed data transfer becomes possible
when USB 2.0 Hi-Speed is supported. Note that certain
computer models, connecting through a USB hub, and
other system conditions can slow down data transfer and
even cause operational problems.
Install the required software in accordance with what version of
Windows you are running and what you want to do.
Using the Camera with a Windows
Computer
Objective
Windows
Version
Install this software:
See
page:
• Viewing
images on
a computer
• Storing
images on
a computer
Vista/XP/
2000/Me –
(USB driver not required.)
–
98SE/98
USB driver Type B
(USB driver. Be sure to
install this driver.)
221
Transfer of
images from
the camera
and
management
of images on
the computer
Vista/XP/
2000
Photo Loader with HOT
ALBUM 3.1
DirectX 9.0c (When DirectX
9.0 or higher is not installed
on the computer already.)
229