Pro-Ject Audio Systems Phono Box II USB - Manual (Page 5)

© Audio Trade GmbH · Pro-Ject Phono Box II USB · Revision 15.10.10/15.12.10
5
Connecting to a Computer (Mac OS operating system)
1. Connect the USB-output of the Phono Box USB to a free USB-socket on your computer and
turn it on/make sure it is powered on.
Please note: Connection should be made to an USB-socket of your computer directly. Connecting to
USB-hubs or switches can cause problems.
2. Open the “System Preferences” panel and select “Sound”.
3. In the “Input” panel “USB Audio CODEC” should be selected (usually preselected).
4. Close the control panel windows and start your recording programme.
Recording Programme
In case you do not have a recording programme installed on your computer, you may download one free from
the Internet. Recording programmes may be found by searching Google or Altavista.
Please be aware that downloads from the Internet are made entirely at your own risk. Under no
circumstances can we carry responsibility or provide support for software products sourced from the
internet or for any damage or problems arising from the use thereof. All downloads should be
checked with an up-to-date anti-virus programme. License fees may be applicable.
Mains power connection
The phono amplifier is supplied with a power supply suitable for your country's mains supply. Check the label
before connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug
from the power supply to the Power ~16V socket of the phono amplifier before connecting the power supply
to the mains.