Pro-Ject Audio Systems Tuner Box User Manual
Page 4
© Audio Trade GmbH · Pro-Ject Tuner Box · Revision 15.10.10/15.12.10
4
Technical specifications Pro-Ject Tuner Box
Tuning range FM-band:
87,5 - 108,5MHz (
50kHz steps
)
Programmable presets:
8
Frequency response:
20Hz - 20kHz (±1dB)
S/N ratio:
50dB
THD: 0,05%
/
∆f 75kHz and f mod 1kHz
Stereo separation:
30dB / ∆f 75kHz and f mod 1kHz
Sensitivity: 7dB/µV mono, 17dB/µV stereo /75 ohms
Antenna input:
1 x co-axial DIN-socket (75 ohms) / US-model F-socket
Line-level output:
1 pair RCA/Phono sockets
Trigger:
12V DC switching voltage
Trigger in and out:
2-pole co-axial ∅ 2,5mm jack
Output voltage:
0,775Vrms
Outboard power supply:
16V/200mA AC, suitable for your country's mains supply
Power consumption:
16V/70mA AC
Dimensions W x H x D (D with sockets): 103 x 36 x 103 (112)mm
Weight:
565g without power supply
Service
Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
PRO-JECT is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Audio Trade GmbH
Copyright © 2008. All rights reserved.
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.