Pro-Ject Audio Systems Set iPod® goes digital User Manual
Page 6
© Audio Trade GmbH · Pro-Ject iPod goes digital-Set · Revision 2013.1.15
6
Replacing batteries
Proceed as follows:
Unlock and slide open the battery case cover
Replace the battery.
Make sure the battery is the right way round !
Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.
Technical specifications Pro-Ject Stereo Box S
Power output:
2 x 25W/30W at 8 ohms/4 ohms (both channels driven)
Frequency response:
20Hz - 20kHz (±0,2dB)
Channel separation:
>40dB at 20kHz
Noise floor:
>-100dB (A weighted)
THD:
<0,05% at 10W
Gain: 22dB
Line-level inputs:
2 pairs RCA/phono sockets
Input impedance:
20kohms
Record Out:
3-pole 3,5mm co-axial jack
Speaker connectors:
4mm banana plugs, spades connectors or naked wire
Outboard power supply:
20V/3A DC (peak 7A DC), suitable for your country's mains supply
Power consumption:
3A DC, <1W in standby
Replacement battery remote control: 1 x CR2032 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (122)mm
Weight:
720g without power supply
Technical specifications Pro-Ject Dock Box S Digital
Frequency response:
20Hz - 20kHz
Line-level output:
1 pair RCA/phono sockets
Output impedance:
15 ohms
Output voltage:
max. 0,775Vrms
Volume control and mute:
min. level -68dB
Digital output:
co-axial (S/PDIF)
D/A-converter:
Cirrus Logic. 24Bit/192kHz
Video output:
S-video socket
Outboard power supply:
9V/2A DC, suitable for your country's mains supply
Power consumption:
800mA DC max.. Power consumption is not constant.
It depends on the charging needs of the battery. <1W in standby
Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (109)mm - height plus height of iPod
®
/iPhone
®
Weight:
585g without power supply
Technical specifications Pro-Ject Speaker Box 5
Recommended amplifier power:
10 - 150 watts
Impedance: 8ohms
Sensitivity (1W/1m):
86dB
Dimensions W x H x D / weight:
160 x 255 x 210mm / 4,2kg