Pro-Ject Audio Systems Pro-Ject 1Xpression Carbon - Manual (Page 3)

© Pro-Ject Audio Systems · Pro-Ject 1 X pression Carbon / Ortofon 2M RED · Revision 2014.02.25 3
Pro-Ject 1 X pression Carbon
Controls, features and connections
1 Motor brackets with ORTOFON
®
pads
2 Stepped drive pulley
3 Drive belt * 3a Hook *
4 Hub
5 Platter *
6 Tonearm counterweight * 6a Downforce scale
7 Tonearm lift lever
8/18 Tonearm rest and removable transport lock
9 Tonearm tube 9a Tonearm base
10 Lid *
11 Lid hinges
12 Hinge fasteners
13 Power supply socket
14 Phono output sockets and earth connection
15 Anti-skating weight adjustment scale
16 Anti-skating weight *
17 Anti-skating weight support hoop
20 Power switch
21 Headshell with finger lift and optional fitted cartridge Ortofon 2M Red
22 Motor
23 Adjustable tip-toe feet with anti-scratch cups *
Connection cable (not shown) *
Power supply (not shown) *
Universal adapter (not shown) *
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO record player.
In order to achieve maximum performance and reliability with this record player you should study these
instructions for use carefully.
! Warning of a hazard for the user, the unit or possible misuse.
Important notice.
The record player is supplied with a factory fitted and adjusted cartridge as an option.
** The following
instructions for adjusting the cartridge are provided in case the cartridge is replaced
by a different model at a later date.
During assembly and adjustment of the deck small parts could be lost if not carefully placed in a
suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above and
correspondingly numbered in the technical drawings above. Separately packed items are marked with
an asterisk *.