Pro-Ject Audio Systems Pro-Ject Xtension 12 Evolution - Manual (Page 3)

© Audio Trade GmbH · Pro-Ject X tension 12 Evolution / X tension Ortofon RS-309D/AS-309S · Revision 2012.8.1
3
Pro-Ject X tension 12 Evolution / Ortofon RS/AS
Controls, features and connections
1 Low voltage cable and power supply socket
2 Stepped drive pulley
3 Drive belt * 3a Hook *
4 Platter *
5 ON/OFF switch, speed selector
6 Arm board 6a Spirit level
7 Adjustable feet *
8 Lid hinges
9 Lid *
Pulley cover (not shown) *
Record weight (not shown) *
Pro-Ject Connect it connection cable (not shown) *
Single adapter (not shown) *
Power supply (not shown) *
Gloves (not shown)
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO record player.
In order to achieve maximum performance and reliability with this record player you should study these instructions
for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable
receptacle.
Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered
in the technical drawings above. Separately packed items are marked with an asterisk *.
Safety instructions
!
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is
easily accessible at all times. Never handle the power supply while your hands are wet or damp.
Avoid letting liquids enter the device. Never place any item containing liquid, such as a flower vase
on or near the device. Never spill any liquid on the device. Never place any naked flame sources,
such as lighted candles on or near the device. The product shall not be used in damp or wet locations,
next to a bathtub, sink, swimming pool or any other similar conditions.
Keep plastic bags away from children to prevent any risk of suffocation.
Useful tips
The base and the record player should be positioned on a low-resonance surface such as wood or multiple
layer ply board to avoid structural vibrations disturbing replay.