CDA MC50 - Manual (Page 2)

INSTALLATION
PRIOR TO CONNECTING
E NSURE THAT THE APPLIANCE IS NOT DAMAGED . Check
that the oven door closes fi rmly against the
door support and that the internal door seal is
not damaged. Empty the oven and clean the
interior with a soft, damp cloth.
AFTER CONNECTING
T
HE EARTHING OF THIS APPLIANCE
is compulso-
ry. The manufacturer will accept no re-
sponsibility for injury to persons, ani-
mals or damage to objects arising from
the non-observance of this requirement.
The manufacturers are not liable for any
problems caused by the user’s failure to ob-
serve these instructions.
D
O NOT OPERATE THIS APPLIANCE
if it has a
damaged mains cord or plug, if it is not
working properly, or if it has been dam-
aged or dropped. Do not immerse the
mains cord or plug in water. Keep the
cord away from hot surfaces. Electrical
shock, fi re or other hazards may result.
D
O NOT REMOVE THE MICROWAVE INLET PROTECTION
PLATES located on the side of
the oven cavity wall. They
prevent grease & food parti-
cles from entering the mi-
crowave inlet channels.
E
NSURE
the oven cavity is
empty before mounting.
C HECK THAT THE VOLTAGE on the rating
plate corresponds to the voltage in your
home.
T
HE OVEN CAN BE OPERATED ONLY
if the oven door is
fi rmly closed.
MOUNTING THE APPLIANCE
F
OLLOW THE SUPPLIED
separate mounting in-
structions when installing the appliance.