PulseTech 490PT+ 12V Digital Battery Analyzer Tester & Printer (741X491) - Manual (Page 7)

800-580-7554 6
6. Press the ''UP/DOWN'' key to select battery test. Press
"ENTER" button.
7. Press the ''UP/DOWN'' key to select the battery type:
a. FLOODED CELL
b. AGM FLAT PLATE
c. AGM SPIRAL
d. GEL
Press "ENTER" to confirm choice.
8. Press the ''UP/DOWN'' key to input the battery capacity
of CCA. Press "ENTER" to begin the test.
9. Press the ''UP/DOWN'' key to
select battery fully charged or not if
tester asks. Press "ENTER" to
confirm choice.
BATTERY TYPE
AGM FLAT PLATE
SET CAPACITY
XXXX CCA
IS THE BATTERY
CHARGED? YES
- 6 -