QHYCCD QHY12 - Manual (Page 17)

31 32
1
2
3
4
5
6
7
8
9
10
Steps
Please download the latest version of the ASCOM
Platform from
http://ascom-standards.org/ . Install
ASCOM and ALSO download any UPDATE that is
available.
http://www.qhyccd.com/download.html download
and install the ASCOM driver of QHY10。
Run MAXIMDL software. Select the camera icon
in the toolbar. The Camera Control window should
appear. Press Setup Camera button inside this
window. Select ASCOM from the menu of
Camera Mode. Click the button of Advanced
button .Select types of QHY10 CCD from the
window of ASCOM Camera Choose. and then
click the button of Properties to set some usual
value of parameters, like the value of
GAIN ,OFFSET and the speed of read-out. Click
the button of OK and back to the window Camera
Control, click the button of CONNECT.
Select the columns of Exposure from the window
of Camera Control.
MAXIMDL ASCOM Connection Mode
Select option of Find Star and set the exposure
time
Click to select the "No Calibration" from the popup
menu of OPTION.
Set the merge mode with X and Y ,like choose
X=4,Y=same.
Press the button of Start to exposure and shoot .
When finished shooting, images will be showed.
You can use the tool of Screen Stretch to adjust
the stretching of image.
Color Image Taken
The Binning modes of QHY10 include 2x2,4x4.
These two modes only output grayscale image.
So these two modes are only useful for focusing
and previewing. If you want to get a color image,
please select the combine mode 1x1.
WWW.QHYCCD.COM