QHYCCD IMG132E - Manual (Page 8)

favorite-Quality the filter Setting: Slider set to retain
image quality, low-quality images can be filtered and removed
the atmospheric jitter impact on image quality, suitable for
astrophotography.
the camera Setup-color/mono: Different cameras have
different Bayer Pattern. We can choose a different Bayer Pattern, to
get the right color. RAW (Mono), do not use the Bayer Pattern, image
monochrome.
the camera Setup-other setting-offset: The
adjustment range is 1-100. Slight backlight compensation on the
image, to increase the overall brightness of the image, to avoid the
darkest pixel value less than 0.
Screen the Zoom: Adjust the screen aspect ratio. Note that
this setting is only to change the display ratio do not to change the
size of footage.
language: Select the display language.
help: Display help on the information.
14
2.4 histogram
hiSt: When selected, it will display a standard histogram of the
photo. Both, the dark and the bright parts of the image, along with
white balance can be analyzed with great accuracy.
oSc: Waveform
birD: Full map preview.
2.5 Display lut
There are four kinds of default processing of predefined data
processing in real time image processing mode: False Color,
Thermal Picture, Black/OverExposure and Negative, the users can
select any of them as needed. This additionally allows three kinds
of customer defined custom modes. Photoshop and other graphic
image software editors along with their corresponding reference
articles are set to install in the LUTMAP folder.
black/over exposure: Use this mode on the overexposed
areas shown in red, underexposed areas are blue features, you can
adjust the GAIN/offset value for the regulation to obtain a normal
exposure picture.
2.6 other menu bar options:
timeStamp Show: When this feature is selected, the
timestamp will be displayed on the screen.
favorite-Show the oSD: Select the function on the screen
will display the OSD box.
favorite - high priority Disk write: This is part of the
small memory of the graphics to make improvements. You can
reduce the display frame rate, slower graphics to ensure that the
file's writing speed.
13