Cisco 3200 Series User Manual
Cisco 3200 series router hardware upgrade guide
Advertising
Table of contents
Document Outline
- Cisco 3200 Series Router Hardware Upgrade Guide
- Contents
- About This Guide
- Introduction
- Replacing Cards in the Cisco 3230 ISR Rugged Enclosure
- Card Replacement Process
- Disconnecting All Cables from the Enclosure
- Removing the Antenna End Cap
- Removing the I/O End Cap
- Removing the Wiring Card
- Removing the Card Stack
- Replacing or Adding a New Card
- Inserting the Card Stack into the Extrusion
- Reattaching the Wiring Card
- Reattaching the I/O End Cap
- Reattaching the Antenna End Cap
- Applying New I/O End Cap Function Labels
- Card Replacement Process
- Replacing Cards in the Cisco ISR 3270 Rugged Enclosure
- Card Replacement Process
- Disconnecting All Cables from the Enclosure
- Removing the Antenna End Cap
- Removing the I/O End Cap
- Removing the Wiring Card
- Removing the Card Stack
- Replacing or Adding a New Card
- Inserting the Card Stack into the Enclosure
- Reattaching the Wiring Card
- Adjusting the WMIC Jumper Settings
- Reattaching the I/O End Cap
- Reattaching the Antenna End Cap
- Applying New I/O End Cap Function Labels
- Card Replacement Process
- Replacing the SFP Module
- Index