Cabletron Systems SmartSTACK ELS100-24TX - Manual

CUSTOMER RELEASE NOTES
2/7/00 P/N: 9032741-08 Subject to Change Without Notice Page 1 of 7
F0615-E
35 Industrial Way
PO Box 5005
Rochester, NH 03867-5005
(603)332-9400
SmartSTACK Fast Ethernet Switches
ELS100-24TX, ELS100-24TXG, and ELS100-24TXM
Firmware Version 2.01.07
(Release Notes Revised February 7, 2000)
INTRODUCTION:
The ELS100-24TX SmartSTACK Fast Ethernet Switch provides 24 10/100 Mbps RJ45 ports.
The ELS100-24TXG SmartSTACK Fast Ethernet Switch provides 24 10/100 Mbps RJ45 ports and 2 GPIM
interface slots for Gigabit connectivity via Cabletron GPIM modules. The GPIMs add two additional ports, 25
and 26, for a total of 26 potentially active ports.
The ELS100-24TXM SmartSTACK Fast Ethernet Switch provides 24 10/100 Mbps RJ45 ports and 2
100BASE-FX multimode and/or singlemode fiber SC ports via a plug-in module (EPIM100-2F2/2F3/2F4).
RJ45 ports 1 and 2 are disabled when the fiber ports are installed for a total of 24 potentially active ports.
It is recommended that one thoroughly review this release note prior to the installation or
upgrade of this product.
FIRMWARE SPECIFICATION:
Status Version No. Version Displayed as * Type Release Date
Current Version 2.01.07 2.1.1.7 Customer 12/10/99
Previous Version 2.01.00 2.1.0.0 Customer 08/13/99
Previous Version 2.00.02 2.0.0.2 Customer 02/11/99
Previous Version 1.00.02 1.0.0.2 Customer 11/01/98
Previous Version 1.00.01 1.0.0.1 Customer 09/01/98
Previous Version 1.00.00 1.0.0.0 Customer 08/01/98
* Note: This is the version displayed by local and remote management.
HARDWARE COMPATIBILITY:
ALL
BOOTPROM COMPATIBILITY:
Bootprom Version: 1.01 or greater
NETWORK MANAGEMENT SOFTWARE SUPPORT: