RearviewSafety RVS-770619P - Manual (Page 11)

11
Reverse With Confidence
Wiring Camera & Monitor
• Audio works on two ports of
multiplexer and positive triggers
must be triggered for audio to
operate. #3 Port labeled “backup”
(blue trigger) #2 port labeled
“DVD” (white Trigger).
• When installing a TWO (2)
camera setup, use ports #3 and
#2 and use positive triggers
Blue and White.
• There is a built-in voltage
regulator for our systems which
can handle 12-24 volts real
consumption is 10 to 30 Volts.
• When installing all THREE (3)
cameras, use all three ports and
connect all positive triggers to
appropriate connections.
To automatically have camera
and monitor turn ON when
vehicle activates, simply twist
BLUE positive trigger 12V+ to
Red Power line 12V+ and wire
to ignition power which can be
an accessory switch/fuse line
and black wire 12V- to chassis
ground.
Infrared technology built into
camera IRs are activated auto-
matically according to the
lighting conditions.
When using the postive trigger
functions (blue, yellow & white
wires) each trigger function
needs to work on a seperate
12V+ source i.e. the Yellow and
White wires can be wired to a
turn signal circuit etc.
Grid lines function can be
turned on/off by pushing MENU
8 times and than select ON/OFF